highway clearing and guardrail company ltd

highway clearing and guardrail company factory

The guardrail can play a role in protecting pedestrians, and is also a beautiful scenic spot in the city. Therefore, we must also do a good job in the regular clearance of guardrail. Today we are going to introduce highway clearing and guardrail company ltd.

highway clearing and guardrail company ltd are:when the cantilever and roll mechanism are carried out in turn, it can be cleaned by the same side guardrail. When the guardrail is finished, the cantilever and rolling brush mechanism can be folded and fixed, and the guardrail cleaning vehicle can run normally on the road surface.

the rolling brush mechanism is located in front of the cab, and the operator can operate directly and clearly.the roller brush mechanism can be fixed to the left front or right front of the cab, and can clean the guardrails on both sides of the freeway to meet the special characteristics of the freeway (one-way driving).

double roller brush operation, high cleaning efficiency, fast operation speed, and its speed of operation is 3~20 km / h.using the patent protection device, the constant distance between the cleaning brush and the guardrail is kept, the cleaning quality is stable, the labor strength of the operator is greatly reduced, and the safety is improved.high pressure flow cleaning, efficient water saving, each ton of water can clean the guardrail 5~8 kilometers. the unique brush design, cleaning does not leave dead corners, does not scratch the paint surface, long-term cleaning can also form a protective film, thereby prolonging the service life of the guardrail.the cleaning process with three punching two brushes is more than 90% after cleaning the guardrail.

the use of independent power source ensures that the cleaning machine works stably and saves energy at the same time.it can be equipped with a variety of vehicle chassis, such as sprinkler, self lifting vehicle, dump truck and so on.cleaning vehicle has advanced technology, reasonable design, safe use, energy saving and environmental protection, and works stably and reliably. It includes the engine, the chassis, the body, the storage tank, the cleaning mechanism, the hydraulic control mechanism, the power variable speed control device, the hydraulic oil tank, the high pressure plunger oil pump, the vertical support and the high pressure water pump.

There is a cleaning mechanism on the outside of the body, and the cleaning mechanism includes two pairs of parallel cylindrical cleaning cylinder, sprinkler, brush, telescopic sleeve vertical oil cylinder, horizontal displacement cylinder, balance body, oil motor and hydraulic four axle gearbox. The utility model has high efficiency, safety and reliability. It can change the backwardness of manual cleaning and railing, and is an ideal cleaning car for cleaning and cleaning the guardrails in cities and towns.

In order to achieve better cleaning effect, the cleaning brush is designed with column and double brush head, and two scrubbing and three to five times are washed (according to the surface fouling degree of the steel plate, the number of water spray is determined). The cleaning brush diameter of the product in our company is designed scientifically according to the centrifugal stress produced by the brush body speed on the brush wire. The long brush wire will reduce the centrifugal stress of the brush and influence the cleaning effect. The length of the brush body is designed according to the width of the standard steel plate. When the operation, the contact surface of the brush body and the steel plate has 25 centimeters, and the too long brush body is wasted due to the different degree of local wear.

highway guardrail distributors

highway clearing and guardrail company ltd in china

The new type highway clearing and guardrail company ltd agent road cleaning guardrail agent because of the one-way road, in order to ensure that the freeway side guardrail can clean and clean the machine's transfer operation. In the design of the working arm, it meets both the right and left adjustable and free expansion, so that the operation process is implemented in the process of different cleaning directions in the process of product operation, and the working arm is free to stretch close to the bumper in the turn, and it is safe and quick and convenient to drive.

In the process of power system design, diesel engine is used as power source, one is that diesel engine has large power, small volume, high reliability, and two is to reduce the operating cost on the whole. By optimizing and adjusting the configuration of power, the best configuration is achieved and the overall rationality and practicability are achieved. Guardrail cleaning vehicle is a multifunctional cleaning equipment for highway facilities.

It is widely used for brushing of urban road isolation barriers and walls beside roads. The high pressure water pump and coil can be installed according to the needs of the users, the city small billboards, the sculpture, and the installation of a number of adjustable high pressure spray guns in front of the cab, and fast flushing the dirt on the side of the road. The key technology of the product is to realize the fast and efficient cleaning of the highway guardrail. The cleaning system is particularly important as a direct executing agency. It is the key of the product design. Its technical advance is as follows:

in the process of cleaning and maintenance, the cleaning process of three flushing and two brushes is used, that is, the cleaning system is equipped with three high pressure ceramics. The nozzle, two brush rollers and two guide rollers can completely remove dirt and grease from the surface of the guardrail during operation. After cleaning, the cleanliness of the guardrail can reach more than 90%. In the design, a number of measures are adopted to protect the quality of the fence.

The new type cleaning guardrail agent road cleaning guardrail agent because of the one-way road, in order to ensure that the freeway side guardrail can clean and clean the machine's transfer operation.

In the design of the working arm, it meets both the right and left adjustable and free expansion, so that the operation process is implemented in the process of different cleaning directions in the process of product operation, and the working arm is free to stretch close to the bumper in the turn, and it is safe and quick and convenient to drive. In the process of power system design, diesel engine is used as power source, one is that diesel engine has large power, small volume, high reliability, and two is to reduce the operating cost on the whole. By optimizing and adjusting the configuration of power, the best configuration is achieved and the overall rationality and practicability are achieved. Guardrail cleaning vehicle is a multifunctional cleaning equipment for highway facilities.

w beam guardrail

It is widely used for brushing of urban road isolation barriers and walls beside roads. The high pressure water pump and coil can be installed according to the needs of the users, the city small billboards, the sculpture, and the installation of a number of adjustable high pressure spray guns in front of the cab, and fast flushing the dirt on the side of the road. The key technology of the product is to realize the fast and efficient cleaning of the highway guardrail. The cleaning system is particularly important as a direct executing agency.

It is the key of the product design. Its technical advance is as follows: in the process of cleaning and maintenance, the cleaning process of three flushing and two brushes is used, that is, the cleaning system is equipped with three high pressure ceramics. The nozzle, two brush rollers and two guide rollers can completely remove dirt and grease from the surface of the guardrail during operation. After cleaning, the cleanliness of the guardrail can reach more than 90%. In the design, a number of measures are adopted to protect the quality of the fence.